Wiz family work surface
- Reversible for twice the life
- Includes a 3/4" (19 mm) Standard BitSert
- Fits both 3/4" (19 mm) and 1" (25 mm) current style standard and InvisibleSponge BitSerts
- 10.25 (26 cm) x 8.625" (21.8 cm)
The waffle board fits in perfectly on the ledge of the grinder. The sponge holder design is different that the older model. We found that the slot to hold the sponge was too small. I would suggest to the manufacturer to revise the opening.
Hi Wendy - Thank you for your review and feedback. For an easier installation of the sponge into the grinder bitsert, we recommend wetting the sponge prior to installing. This keeps the sponge in place while grinding and allows for good contact of the sponge to the grinder bit. If you prefer the larger opening, the plastic could be modified by cutting away or grinding down the plastic section between the grinder bit and the sponge. We hope this helps and if you have any further questions, please reach out to us at (248) 583-7150.